favorite
favorite
hide
unhide
flag

Posted

print

PROFESSIONAL FORESTRY FIRE HOSES NEW 1 1/2" + 1" - $225 (Santa Fe (northeast) 2 mi to plaza)

PROFESSIONAL FORESTRY FIRE HOSES NEW  1 1/2" +  1" 1 thumbnailPROFESSIONAL FORESTRY FIRE HOSES NEW  1 1/2" +  1" 2 thumbnailPROFESSIONAL FORESTRY FIRE HOSES NEW  1 1/2" +  1" 3 thumbnailPROFESSIONAL FORESTRY FIRE HOSES NEW  1 1/2" +  1" 4 thumbnailPROFESSIONAL FORESTRY FIRE HOSES NEW  1 1/2" +  1" 5 thumbnailPROFESSIONAL FORESTRY FIRE HOSES NEW  1 1/2" +  1" 6 thumbnailPROFESSIONAL FORESTRY FIRE HOSES NEW  1 1/2" +  1" 7 thumbnailPROFESSIONAL FORESTRY FIRE HOSES NEW  1 1/2" +  1" 8 thumbnailPROFESSIONAL FORESTRY FIRE HOSES NEW  1 1/2" +  1" 9 thumbnailPROFESSIONAL FORESTRY FIRE HOSES NEW  1 1/2" +  1" 10 thumbnail
condition: new
make / manufacturer: FIRE HOSE DIRECT
I am selling brand-new made in the USA professional fire hoses(1 1/2" hose 50' X 2 + 1" X 1 50") together with 2 two nozzles.These hoses are made by the largest fire hose manufacturer in the United States. They are manufactured to meet or exceed NFPA standards used by United States Forestry Service (USFS).

The current retail cost for this equipment would be $555. I am selling All for $225.Ok to make an offer.

The 1.5 and 1 inch "Made in the USA" yellow forestry fire hoses are manufactured to meet and exceed all performance requirements of NFPA 1961 and USDA-US Forestry Service Specification 5100-187 Type 2. Jacket construction shall be a 1-2 woven twill pattern with the 2 over-crossing on the exterior of the jacket. This wildland fire hose jacket is sealed with a polyurethane based polymer impregnation for abrasion and mildew resistance and requires no drying. Meets FSS 450 WP 187 Type II per USDA / USFS 5100-187c specification.

• Made In USA
• Hose Size - 1 1/2 inches (Inside Diameter)
• Hose Length - 50 feet (Approximately) ( 2 X 50’ lengths)
• Male Coupling - Aluminum 1 1/2 inch NH / NST
• Swivel Female Coupling - Aluminum 1 1/2 inch NH / NST
• The Female Coupling Will Only Connect to a Male 1 1/2 inch NH / NST
• Compatible Nozzle - 1 1/2 inch NH / NST only
• Hose Type - Polyester Single Jacket (Mildew Resistant)
• Color - Yellow
• Liner - EPDM Rubber
• Approximate Width Laying Flat - 2 1/2 inches
• Service Pressure - 300 PSI
• Proof Test Pressure - 600 PSI
• Burst Test Pressure - 900 PSI

• Made In USA
• Hose Size - 1 inch (Inside Diameter)
• Hose Length - 50 feet (Approximately)
• Male Coupling - Aluminum 1 inch NPSH
• Swivel Female Coupling - Aluminum 1 inch NPSH
• The Female Coupling Will Only Connect to a Male 1 inch NPT or NPSH
• Compatible Nozzle - 1 inch NPSH only
• Hose Type - Polyester Single Jacket (Mildew Resistant)
• Color - Yellow
• Liner - EPDM Rubber
• Approximate Width Laying Flat - 1 3/4 inches
• Service Pressure - 300 PSI
• Proof Test Pressure - 600 PSI
• Burst Test Pressure - 900 PSI

FIREHOSE NOZZELS
• Material - Plastic
• Size - 1 1/2 inches plus 1 inch
• Threads - NH / NST 9 TPI
• This nozzle will only connect to a 1 1/2 inches NH / NST hose
• Maximum operating pressure - 100 PSI
• Approximate Gallons Per Minute (GPM) - 60
• Approximate Distance - 60 feet
• Positions - Fog, straight stream and off
• NSN - 4210-00-181-8872
• NFES - 0138

post id: 7756062208

posted:

updated:

best of [?]

loading
reading
writing
saving
searching